Ricoh MP C6502SP Field Service Manual page 1495

1. Close the duplex unit lower guide plate and push the drawer unit back into the machine.
2. Set SP5-806-174 (Duplex Exit Mtr:Feed Speed:Std Speed) to ON to rotate the duplex
transport rollers 2 and 3.
3. While keeping SP5-806-161 set to ON, set SP5-806-200 (Shift Roller Motor2:Homing) ON
and then OFF. Repeat the ON/OFF cycle 10 times.
4. Set SP5-806-174 (Duplex Exit Mtr:Feed Speed:Std Speed) back to OFF.
5. Pull out the drawer unit and open the duplex unit lower guide plate.
6. Slide the idle rollers of duplex transport roller [C] and duplex exit roller [D] with your fingers
toward the back side of the machine as far as they go.
• Make sure to grip the edge of the rollers, not the surface.
Other Problems
1493