Ricoh MP C6502SP Field Service Manual page 1508

Hide thumbs Also See for MP C6502SP:

Table of Contents

5. Troubleshooting

[A]: Attach shims here for Skew Type #02.

[B]: Attach shims here for Skew Type #01.

• Do NOT attach more than 7 shims to each position. Doing so could cause unexpected side

effects, for example, banding level is getting worse at rear side or front side because the laser

writing focus will be abnormal due to the too large distance between laser unit and OPC

6. Put back the CK laser unit and confirm reduction in the amount of skew to complete the procedure.

Chapters

Table of Contents