Ricoh MP C6502SP Field Service Manual page 1522

5. Troubleshooting
[CrnrStplrMxPrstkShAdj:2K/3KFIN]
Adjusts Maximum Pre-Stack Number for Corner Stapler for specified papers.
6116
Adjustment value: 0; 1 sheet Pre-Stack (Standard),
Adjustment value: -1: No Pre-Stack.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4Y
005 B5T
006 B5Y
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT-Y
011 8-Kai SEF
012 16-Kai SEF
013 16-Kai LEF
Other
Adjusts Maximum Pre-Stack Number for Corner Stapler for specified papers.
014
Adjustment value: 0; 1 sheet Pre-Stack (Standard),
Adjustment value: -1: No Pre-Stack.
Symptom 2:
1. Set SP6107-001 to -014([JogPosAdj(CrnrStplr):2K/3K FIN]) to a higher value within the
setting range of 1.0mm – 1.5mm.
2. Make some test printouts and check the alignment of the paper.
• This check is necessary because if the value of SP6107 is too high, the jogger fences will
be too far apart.
1520
*ENG
ENG
[-1 to 0 / 0 / 1 page/step]
ENG
ENG
ENG
ENG
ENG
[-1 to 0 / 0 / 1 page/step]
ENG
ENG
ENG
ENG
ENG [-1 to 0 / 0 / 1 page/step]
ENG
ENG [-1 to 0 / 0 / 1 page/step]