Installing Visualdsp++ License; Setting Up The Ez-Kit Lite Hardware - Analog Devices ADSP-21992 EZ-KIT LITE System Manual

Installing VisualDSP++ License

To install the VisualDSP++ license:
1. Locate the serial number provided on the sticker affixed to the CD
sleeve and the registration form.
2. From the Start menu, choose Programs, Analog Devices,
VisualDSP++ 3.5 for 16-bit Processors, VisualDSP++
Environment.
3. The information screen asks if you would like to install a license.
Click Yes. The About VisualDSP++ screen appears.
4. Select the Licenses tab and click New.
5. In the Install a New License dialog that opens, select Single User.
6. Fill in the tools serial number in the field provided exactly as it
appears on your CD sleeve or registration form and click Next. An
information window notifies of successful license installation.

Setting Up the EZ-KIT Lite Hardware

The EZ-KIT Lite evaluation system contains ESD
(electrostatic discharge) sensitive devices. Electrostatic
charges readily accumulate on the human body and
equipment and can discharge without detection. Per-
manent damage may occur on devices subjected to
high-energy discharges. Proper ESD precautions are
recommended to avoid performance degradation or
loss of functionality. Store unused EZ-KIT Lite boards
in the protective shipping package.
The ADSP-21992 EZ-KIT Lite board is designed to run outside your per-
sonal computer as a stand-alone unit. You do not have to open your
computer case.
ADSP-21992 EZ-KIT Lite Evaluation System Manual
Getting Started
1-5