Installation - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.11.1 Installation
Install the EXPRESSBUILDER Assembly Kit according to the following procedure:
1.
Remove the top cover according to Chapter 2 (1.4.1 Removal of top cover).
2.
Insert the projection of EXPRESSBUILDER Assembly Kit into the groove on CPU blade chassis, and slowly
move EXPRESSBUILDER Assembly Kit until the connector on EXPRESSBUILDER Assembly Kit is aligned with
EXPRESSBUILDER Assembly Kit connector on CPU blade.
Important
3.
Mount EXPRESSBUILDER Assembly Kit to the CPU blade and secure it with a single screw.
Do not touch the terminals of the card with your bare hand. Fingerprints and
dust left on it causes the CPU blade to malfunction.
Insert EXPRESSBUILDER Assembly Kit perpendicularly into the connector.
Inserting EXPRESSBUILDER Assembly Kit with being inclined may damage
connector pins and/or connectors.
If you have trouble installing the EXPRESSBUILDER Assembly Kit, remove the
EXPRESSBUILDER Assembly Kit once and try again. If you apply excessive
pressure on EXPRESSBUILDER Assembly Kit, the EXPRESSBUILDER
Assembly Kit might be damaged.
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
73
Advertisement
Table of Contents
