Status Lamp - NEC Express5800 Series User Manual

Chapter 1 General Description

4.3.2 STATUS Lamp

The STATUS lamp stays lit in green when the CPU blade is in successful operation. When the STATUS lamp
is flashing in amber or red, it indicates that the system has failed.
In addition, you can view the detailed information on error message on virtual LCD when the STATUS lamp is
flashing in amber or red.
You can use the virtual LCD through the Web browser of EXPRESSSCOPE Engine 3 (BMC) or NEC ESMPRO
Manager.
The following table lists indications of the STATUS lamp, descriptions, and actions to take.
If an error occurs, contact your sales representative.
Tips
Status of
STATUS lamp
On
Off
On
Flash
Flash
Tips
If the CPU blade has the NEC ESMPRO installed, you can view the error log to identify
the cause of a trouble.
Color Description
Green The CPU blade is operating normally.
– The power is turned off.
Red BMC is being initialized.
Red BMC does not work normally due to
incorrect installation of LAN riser card.
An error occurred. Identify the error cause according to Chapter 3 (1. POST "Error
messages on a virtual LCD") in Maintenance Guide.
Amber A warning level error occurred. Identify the error cause according to Chapter 3 (1.
POST "Error messages on a virtual LCD") in Maintenance Guide.
If the CPU blade is powered off while the STATUS lamp is flashing in amber or red, the
indication of the STATUS lamp is retained except for certain factors. When the CPU blade
is powered on, the STATUS lamp goes on green (normal status).
Express5800/B120d, B110d User's Guide
4. Names and Features of Component
Action
–
Turn on the power.
1. Wait until the lamp goes off.
2. If the lamp still goes on, check
installation status of the CPU blade.
If the indication of ID lamp does not
change even when the ID switch is
pressed, contact your sales
representative. The virtual LCD indication
cannot be obtained because BMC is not
working.
33