NEC Express5800 Series User Manual page 105

Chapter 3 Setup
(5)
Storage Configuration submenu
From the Advanced menu, select SATA Configuration and then press the <Enter> key to display the menu
screen shown below. For the menu that has
key to show its submenus.
For details about the options, see the table below.
Option
SATA Information
SATA Mode
Hard Disk Pre-Delay
If RAID Mode is selected for SATA Mode, the screen as shown below appears.
on the left, move the cursor to it and then press the <Enter>
Parameter
–
This option is not displayed when SATA Mode is set to
RAID Mode.
Disabled
Set SATA Mode.
IDE Mode
AHCI Mode
[RAID Mode]
[Disabled] The system waits the specified amount of time before
accessing HDD devices during POST processing
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
Express5800/B120d, B110d User's Guide
2. Details of System BIOS
Descriptions
[ ]: Factory settings
105