Resetting Management Information - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.8.4 Resetting Management Information
Reset the management information on the replaced Hard Disk Drive in the following procedure.
1.
Select Settings
Control Panel
NEC ESMPRO Agent Properties is displayed.
2.
Click on the General tab in NEC ESMPRO Agent Properties.
3.
Select Storage Setting... in the General tab.
Storage is displayed.
4.
Click on the Reset tab in Storage.
5.
After selecting the replaced Hard Disk Drive in Hard disk drive list, click on OK. (The Hard Disk Drives are also
listed in Hard disk drive list.)
The management information on the replaced Hard Disk Drive is reset.
6.
Close the dialog box.
7.
Close NEC ESMPRO Agent Properties.
66
NEC ESMPRO Agent from the Start menu.
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
