Connecting With Ups - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
2.2.3 Connecting with UPS
To connect the power cord from the Blade Enclosure to an interruptive power supply (UPS), use outlet socket
on the rear of the UPS. Refer to the manual that comes with the UPS for details.
<Example>
Option slot
Input connector
(NEMA5-15P)
When the power cord from the Blade Enclosure is connected to a UPS, you may need to change the BIOS
SETUP of the CPU blade to link with power supply from the UPS.
Run BIOS SETUP, and select Server
automatic operation via UPS. For more information, refer to Chapter 2 (1.1.4 Server) in Maintenance Guide.
Computer interface port (USB)
Reset button for
overload prevention
Computer interface port (COM)
Voltage sensitivity setting button
AC-LINK and change parameter appropriately. Select Power On for
Express5800/B120d, B110d User's Guide
2. Installation and Connection
Outlet socket
Connector for TVSS device
81
Advertisement
Table of Contents
