NEC Express5800 Series User Manual page 118

Chapter 3 Setup
(2)
Power Control Configuration submenu
From the Server menu, move the cursor to Power Control Configuration and then press the <Enter> key to
show its submenus.
For details about the options, see the table below (display only).
Option
AC-LINK
The table below shows the operation when the AC power is turned off once and then back on, in accordance
with the AC LINK setting.
System status before AC power was turned
off
Operating
Abort (DC power is also Off)
Forced shutdown*
* Continue pressing the POWER switch for at least 4 seconds to forcibly turn off the power.
Tips
118
Parameter
Stay Off
Specify AC link feature. Specify how the DC power state should
[Last State]
be when the AC power is supplied again after loss of power.
Power On
(See the table below)
Stay Off
Off
Off
Off
If an uninterruptible power supply (UPS) is used for automatic operation, set the AC-LINK
to Power On.
Express5800/B120d, B110d User's Guide
2. Details of System BIOS
Descriptions
AC LINK setting
Last State Power On
On On
Off On
On On