Basic Safety Notices; General Safety Information; Requirements For Users And Duties For Operators; Intended Use - ETAS FETK-S1.1 User Manual

ETAS
2

Basic Safety Notices

This chapter contains information about the following topics:
• "General Safety Information" on page 9
• "Requirements for Users and Duties for Operators" on page 9
• "Intended Use" on page 9
• "Identifications on the Product" on page 13
• "Taking the Product Back and Recycling" on page 14
• "CE marking" on page 14
• "RoHS Conformity" on page 14
• "Declarable Substances" on page 15
• "Use of Open Source Software" on page 15
2.1

General Safety Information

Please observe the Product Safety Notices ("ETAS Safety Notice") and the fol-
lowing safety notices to avoid health issues or damage to the device.
NOTE
Carefully read the documentation (Product Safety Advice and this User's
Guide) that belongs to the product prior to the startup.
ETAS GmbH does not assume any liability for damages resulting from
improper handling, unintended use or non-observance of the safety precau-
tions.
2.2

Requirements for Users and Duties for Operators

The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Improper use or use by
a user without sufficient qualification can lead to damages or injuries to one's
health or damages to property.
The safety of systems using the product is the responsibility of the system inte-
grator.
General Safety at Work
The existing regulations for safety at work and accident prevention must be
followed. All applicable regulations and statutes regarding operation must be
strictly followed when using this product.
2.3

Intended Use

An ETK is an electronic component that is installed in a vehicle control unit
(ECU) to read data from the ECU or write data to the ECU.
FETK-S1.1 - User's Guide
Basic Safety Notices
9