Technical Data; System Requirements; Etas Compatible Hardware; Pc With One Ethernet Interface - ETAS FETK-S1.1 User Manual

ETAS
7

Technical Data

7.1

System Requirements

7.1.1

ETAS Compatible Hardware

ETAS Hardware: ES89x ECU Interface Modules
7.1.2

PC with one Ethernet interface

A PC with one open Ethernet interface (1 Gbit/s) with RJ-45 connection is
required to connect the ES89x module. Ethernet interfaces that are imple-
mented with an additional network card in the PC must feature a 32-bit data
bus.
7.1.2.1 Requirement to ensure successful initialization of the module
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
To deactivate the power saving mode
Choose in Windows System Control Center / Device Manager / Network
Adapter the used network adapter by double-click. Deactivate the "Allow the
computer to turn off this device to save power" option in the "Power Manage-
ment" register. Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• "Link down Power saving"
• "Allow the computer to turn off this device to save power"
7.1.3

Software Support

You need the following software versions to support the FETK-S1.1. Operating
the FETK-S1.1 with older software versions is not possible.
FETK-S1.1 - User's Guide
Technical Data
36