ETAS
7.2
Data Emulation and Measurement Memory
7.2.1
Data Emulation Memory and Microcontroller Support
The FETK-S1.1 uses a portion of or up to the entire size of the ED RAM, to emu-
late data in internal flash. The following table lists the supported microcontrol-
lers, the size of the ED RAM, and states if the ED RAM is capable of being
powered using a standby supply.
Microcontroller
TC26x-ED
TC27x-ED
TC29x-ED
TC37x-ED
TC39x-ED
7.2.2
Measurement Data Memory
Item
Location
Update
7.3
FETK Ethernet Interface
Item
Connection
Cable length
Ethernet Interface
NOTE
The FETK Ethernet interface utilizes a proprietary Ethernet protocol and is
compatible only with the Gigabit Ethernet interfaces of the ES89x ECU Inter-
face Module.
FETK-S1.1 - User's Guide
Max. ED RAM
512 kByte
1 MByte
2 MByte
3 MByte
4 MByte
Characteristics
Typically located within the emulation
memory when using DISTAB17
hooks. Measurement data memory
can be located in internal RAM if the
entire ED RAM is needed for calibra-
tion.
Logic devices updated using HSP
software
Characteristics
1 Gbit/s Ethernet
max. 30 m / 100 ft
DC decoupling
Technical Data
Standby powered
Yes
Yes
Yes
Yes
Yes
38