Etam9 Adapter; Usage; Ecu Signals; Temperature Range - ETAS FETK-S1.1 User Manual

ETAS
8.13

ETAM9 Adapter

Fig. 8-22
8.13.1

Usage

The ETAM9 adapts the FETK/ XETK power signals (Molex 6 pin connector) to
the ECU with an 5 pin Molex Pico Spox connector.
The ETAM9 cable requires on the ECU side an Vertical SMT Header connector
[87437-0543] or an Right Angle SMT Header connector [87438-0543].
8.13.2

ECU Signals

Pin Color
1 Blue
2 Yellow
3 Brown
4 Green
5 Red
6 -
8.13.3

Temperature Range

Condition
Operating temperature
8.13.4

Order Information

Product
ETAM9 F/XETK-S ECU Adapter, MOLEX -
MOLEX (6fc - 5fc), 0m136
FETK-S1.1 - User's Guide
FETK/ XETK - ECU Adapter ETAM9
Signal Description
VDDPSTBY Permanent power supply of ECU interface
(Supply)
VDDSTBY Permanent power supply of ECU ED RAM
(Supply)
GND Power ground
Cal_Wakeup Switch to Ubatt. ECU wake-up signal (for
measurement preparation)
SGUBATT1 Car battery
- No Connect
Temperature Range
-40 °C to +110 °C
Cables and Accessories
Length Order Number
0.136 m F 00K-111-043
63