ETAS FETK-S1.1 User Manual page 37

ETAS
7.1.3.1 FETK-S1.1A
Microcontroller
TC26x-ED
TC26x-PD
TC27x-ED C-step
TC27x-PD
TC29x-ED
TC29x-PD
1)
: and higher microcontroller versions (steps) if they support the C-step spec-
ifications
7.1.3.2 FETK-S1.1B
Microcontroller
TC33x PD
TC36x PD
TC37x PD
TC37x-ED
TC38x-PD
TC39x-ED A-step
TC39x-ED B-step
1)
: and higher microcontroller versions (steps) if they support the B-step spec-
ifications
The configuration instructions for the FETK-S1.1 under INCA and HSP are con-
tained in the relevant software documentation.
To support Trace to RAM you need the following software versions:
• HSP V11.10.0
• INCA V7.2.11
• ETK Tools V4.1.11
Supporting Trace to RAM with older software versions is not possible.
FETK-S1.1 - User's Guide
HSP INCA
V11.8.0 V7.2.8
V11.8.0 V7.2.8
1)
V11.8.0 V7.2.8
V11.8.0 V7.2.8
V11.8.0 V7.2.8
V11.8.0 V7.2.8
HSP INCA
V12.0.0 V7.3.0
V11.15.0 V7.2.15
V11.15.0 V7.2.15
V11.12.0 V7.2.12
V11.8.0 V7.2.8
V11.8.0 V7.2.8
1)
V11.8.0 V7.2.8
Technical Data
ETK ASCET-RP INTECRIO
Tools
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
ETK ASCET-RP INTECRIO
Tools
V4.2.0 V6.4.3
V4.1.16 V6.4.3
V4.1.16 V6.4.3
V4.1.13 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.1.9 V6.4.3
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
V4.6.2
37