Jumpers On The Mungo540 - Kontron Mungo540 User Manual

Jumpers on the Mungo540

The jumpers on the Mungo540 allow you to configure your board
according to the needs of your applications. If you have doubts about the
best jumper configuration for your needs, contact your dealer or sales
representative. The following table lists the connectors on Mungo540 and
their respective functions.
Jumper Locations on the Mungo540 ...............................................12
JP1: Clear CMOS Content ..........................................................13
JP2: Panel Power Setting ............................................................13
JP4: Boot Block Lock/Unlock ....................................................13
JP5: Select Panel Display Type Setting....................................14
JP6: COM3/COM4 RS232 +5V / +12V Power Setting.............14
JP8: COM1/COM2 RS232 +5V / +12V Power Setting.............14
JP9: DiskOnChip BIOS Expansion Address Select ................15
JP10: RS232/422/485 Selection...................................................15
The following examples show the conventions used in this section.
RI7SM User's Manual
Jumper Open
Jumper Closed
11