J5: Smi/Hardware Switch; J6: Turbo Led Connector; J7: Digital I/O Connector - Kontron Mungo540 User Manual

J5: SMI/Hardware Switch: Pins 1 and 2
This connector supports the "Green Switch" on the control
panel, which, when pressed, will force the system into the
power-saving mode immediately.
J6: Power LED Connector: Pins 1 and 2
The Power LED will always be 5V when attached to this
connector.

J7: Digital I/O Connector

This 10-pin Digital I/O connector supports TTL levels and is used to
control external devices requiring ON/OFF circuitry.
Signal Name
SPECIFICATIONS:
Digital Input
Input channels: 2 bits
Input Voltage:
Input Load:
Register Address: 240H
Register Format: BIT:
RI7SM User's Manual
Pin #
DO0 1
DO1 3
DO2 5
DO3 7
Ground 9
Ground 11
High: 2.0V (min)
Low: 0.8V (max)
High: 0.05mA max at 2.7V
Low: 0.4mA max at 0.5V
D1 D0
Value: DI1 DI0
Pin # Signal Name
1 Sleep
2 Ground
Pin # Signal Name
1
2 Ground
Pin # Signal Name
2 Vcc
4 DI0
6 DI1
8 DI2
10 DI3
12 +12V
5V
19