Table of Contents
Advertisement
UR2 Duplex Mode
The settings available for this field are Half (default) and Full.
Use IR Pins
The settings for this field are IR, Rx2Tx2 (default) and RxD2, TxD2.
Onboard Parallel Port
The setting for this field are 378/IRQ7, 278/IRQ5, 2BC/IRA7 and
Disabled. By default, the onboard parallel port is set to 378/IRQ7.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
EPP
ECP
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial/parallel port and its
address. The default values for these ports are:
Serial Port 1
Serial Port 2
Serial Port 3
Serial Port 4
Parallel Port
Noted: If both PC 104 taken effect, the item of IRQ5 will be used with
manual selected. If you do not use them, please select IRQ5 with
COM4.
Digital I/O Port
This function is support TTL levels and is used to control external
devices. The options are Disable, 220h, 240h and 260h.
RI7SM User's Manual
Normal Printer Port
Enhanced Parallel Port
Extended Capabilities Port
3F8/IRQ4
2F8/IRQ3
3E8/IRQ10
Disable
378H/IRQ7
CMOS Setup Utility – Copyright ( C ) 1984-2001
INTEGRATED PERIPHERIAL
AWARD SOFTWARE INC.
51
Advertisement
Chapters
Table of Contents
