Cpu Installation - Kontron Mungo540 User Manual

CPU Installation

The Mungo540 single board computer supports a Socket 370 connector
processor socket for Intel Pentium III processors.
The Socket 370 connector comes with a lever to secure the processor.
Before inserting the CPU, make sure the lever is raised perpendicular to
the socket and the notch on the corner of the CPU corresponds with the
notch on the inside of the socket.
After you have installed and lock the processor into place, check if the
jumpers for the CPU type and speed are correct.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
RI7SM User's Manual 9