Time; Primary Hdds / Secondary Hdds - Kontron Mungo540 User Manual

Time

The time format is:
To set the time, highlight the "Time" field and use the <PgUp>/ <PgDn> or
+/- keys to set the current time.

Primary HDDs / Secondary HDDs

The onboard PCI IDE connectors provide Primary and Secondary
channels for connecting up to four IDE hard disks or other IDE devices.
Each channel can support up to two hard disks; the first is the "Master"
and the s econd is the "Slave".
To enter the specifications for a hard disk drive, you must select first a
"Type". There are 45 predefined types and 4 user definable types are for
Enhanced IDE BIOS. Type 1 to 45 are predefined. Type "User" is
user-definable. For the Primary Master/Slave as well as Secondary
Master/Slave, you can select "Auto" under the TYPE and MODE fields.
This will enable auto detection of your IDE drives and CD-ROM drive
during POST.
Press <PgUp>/<PgDn> to select a numbered hard disk type or type the
number and press the <Enter> key. The hard disk will not work properly if
you enter incorrect information for this field. If your hard disk drive type is
not matched or listed, you can use Type User to define your own drive
type manually. If you select Type User, related information is asked to be
entered to the following items.
CYLS :
HEAD :
PRECOMP :
LANDZ :
SECTOR :
SIZE :
MODE (for IDE HDD only) :
RI7SM User's Manual
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
Number of cylinders
Number of read/write heads
Write precompensation
Landing zone
Number of sectors
Automatically adjust according to the configuration
Auto
Normal (HD < 528MB)
Large (for MS-DOS only)
LBA (HD > 528MB and supports
Logical Block Addressing)
41