Installing LAN Driver for Windows NT 4.0
You should install the Windows NT 4.0 Service Pack 3 or above first
before installing the drivers. If you do not have the Windows NT 4.0
Service Pack 3 or above, please contact your software vendor or
download it from Microsoft's web site. The procedures below show you
how to install the LAN drivers for Windows NT 4.0.
Noted: You can use the function of "Intel 8255X MakeDisk Utility" with
this driver CD to make diskette before the procedures are installing.
Step 1: Click Start ⇒ Settings ⇒ Control Panel.
Step 2: Double click Network.
Step 3: Click Adaptor ⇒ ADD.
Step 4: Insert diskette into floppy ⇒ Have Disk.
Step 5: Click OK.
Step 6: Click OK.
Step 7: Click Close.
Step 8: The LAN adapter must be filled in IP Address, Subnet Mark
and Default Gateway ⇒ OK.
Step 9: Click Yes. You must restart your computer now.
76
Mungo540 User's Manual