AUMA AC 01.2 Manual page 133

Actuator controls
AC 01.2/ACExC 01.2 Profinet
Function not active
Function active
Function not active
Function active
Device configuration M0053
Application functions M0178
Activation M0212
Maintenance signals M1136
Default value: Function not active
Setting values:
<Maintenance signals> function deactivated.
<Maintenance signals> function activated.
Activate maintenance interval
Required user level: Specialist (4) or higher.
Device configuration M0053
Application functions M0178
Activation M0212
Maintenance interval M1137
Default value: Function not active
Setting values:
<Maintenance interval> function deactivated.
<Maintenance interval> function activated.
Display maintenance information
Maintenance signals M1231
Maintenance M1644
Maintenance informat. M1037
Figure 63: Example of bar chart
The bar charts indicates the current consumption of the following lifetime accounts:
Lifetime mechanics
Lifetime seals (O-rings)
Lifetime lubricants
Lifetime contactors (only for actuator controls which are not provided with variable
speed function)
Maintenance interval (adjustable)
Once a bar reaches the threshold (- - - ), maintenance will be required.
Reset parameter
Once maintenance is complete, the parameter initiating the request must be reset.
Starting from Maintenance informat. M1037 indication, you can change via Edit to
the reset mode.
Required user level: Specialist (4) or higher.
Device configuration M0053
Application functions M0178
Activation M0212
Asset Management
133