Stepping Mode: Activate; Operation Mode For Stepping Mode - AUMA AC 01.2 Manual

Application functions
8.6.1.

Stepping mode: activate

Function not active
Function active
8.6.2.

Operation mode for stepping mode

Off
62
Figure 41: Stepping mode
[1] Stepping range OPEN
[2] Stepping range CLOSE
P1 Start of stepping mode
P2 End of stepping mode
t1 Operating time for normal operation
t2 Operating time for stepping mode
t3 Running time
t4 Off time
Stepping mode can be individually activated for the directions OPEN and CLOSE.
Required user level: Specialist (4) or higher.
Device configuration M0053
Application functions M0178
Activation M0212
Timer CLOSE M0156
Timer OPEN M0206
Default value: Function not active
Setting values:
Function <Stepping mode> deactivated.
Function <Stepping mode> activated.
Stepping mode can be activated via operation modes Local and/or Remote.
Customer settings M0041
Timer M0142
Step mode CLOSE M0157
Step mode OPEN M0207
Default value: Off both directions
Setting values:
Stepping mode is switched off.
Actuator controls
AC 01.2/ACExC 01.2 Profinet