X-Ref Target - Figure 1-17
6.
VC7203 IBERT Getting Started Guide
UG847 (v3.0) July 10, 2013
Figure 1-17: Serial I/O Analyzer - Create Links...
A Create Links window pops up. In this window you can link any TX to RX GTs. To
create links, select the TX GT and RX GT from the two lists, then press the Add (+)
button. For this project, connect the following links:
MGT_X1Y8/TX to MGT_X1Y8/RX
MGT_X1Y9/TX to MGT_X1Y9/RX
MGT_X1Y10/TX to MGT_X1Y10/RX
MGT_X1Y11/TX to MGT_X1Y11/RX
This is shown in
Figure
1-18.
www.xilinx.com
Running the GTX IBERT Demonstration
21