Xilinx Virtex-7 FPGA VC7203 Getting Started Manual page 15

2.
X-Ref Target - Figure 1-11
3.
4.
5.
VC7203 IBERT Getting Started Guide
UG847 (v3.0) July 10, 2013
In the Hardware Session window, click Open a new hardware target (highlighted in
Figure 1-11).
Figure 1-11: Open a New Hardware Target
An Open Hardware Target wizard pops up. Click Next on the first window.
In the Vivado CSE Server Name window, make sure localhost:60001 is entered for
the Server name. Click Next and it opens the server to connect to the Digilent JTAG
cable.
In the Select Hardware Target window, the Digilent cable appears under Hardware
Targets and the JTAG chain contents of the selected cable under Hardware
(Figure 1-12). Select digilent_plugin and click Next.
Devices
www.xilinx.com
Running the GTX IBERT Demonstration
15