Xilinx Virtex-7 FPGA VC7203 Getting Started Manual page 17

To start the SuperClock-2 module:
1.
X-Ref Target - Figure 1-13
2.
VC7203 IBERT Getting Started Guide
UG847 (v3.0) July 10, 2013
The Hardware window shows the System ACE and the XC7VX485T device and
reports that it is programmed. Select XC7VX485T_1. In the Hardware Device
Properties window, enter the file path to the Probes file associated with the Q115
IBERT design (vc7203_q115.ltx)
Figure 1-13: Adding the Probes File
In the Hardware window, right-click XC7VX485T_1 and select Refresh Device
(Figure 1-14).
www.xilinx.com
Running the GTX IBERT Demonstration
(Figure 1-14).
17