Mounting Wind Deflectors Left/Right - ESDEC FlatFix Fusion Manual

6.16 Mounting wind deflectors left/right

Lay the first left-hand wind deflector to the left of the panel field and the first right-hand wind deflector to the right side.
ATTENTION! The flange of the wind deflector must always be oriented towards the panel field.
Mount the two wind deflectors (left and right) carefully by pressing the sunlocks in the wind deflectors over the pawls of the
base elements. All lips of the sunlock must equally grip the pawl of the base element. Press the wind deflector firmly so that
it connects properly to the base element. The wind deflectors may then be fastened further using a self-tapping screw (100-
3010) at the location of the base element high and low.
Lay the second left-hand wind deflector to the left of the panel field and the second right-hand wind deflector to the right
side. ATTENTION! The flange of the wind deflector must always be oriented towards the panel field.
Mount the two wind deflectors (left and right, with overlap) carefully by pressing the sunlocks in the wind deflectors over the
pawls of the base elements. The wind deflectors may then be fastened further using a self-tapping screw (100-3010) at the
location of the base element high and low.
When required to ground the wind deflectors (optional), you can fasten them with a self-tapping screw 6.3x32. Tighten
this screw through the wind deflector and the base profile. Use the pre-drilled hole beside the lower sun lock in the wind
deflector as reference. The side wind deflectors are now grounded and secured. And the first row of solar panels is now
ready!
Rev. 10.09.19 MANUAL FOR FLATFIX FUSION MOUNTING SYSTEM FOR FLAT ROOFS
21