Starting The Tool; Authentication Option - Honeywell Notifier ID3000 Manual

See 'Help' menu 'About' option for the current
authentication status of the Tool.
1
ID3000/ID2000 Fire Panel Configuration Tool Manual
2
1 - 3

1.3 Starting the Tool

Do one of:
a. Double-click on the Tool icon.
b. Select 'Programs/Notifier/ID Series
Configuration Tool' from the PC's 'Start' menu.
The Tool uses standard windows methods of
opening, closing, selecting etc.

1.3.1 Authentication Option

If the Tool is authenticated, upon first communi-
cation with any panel using panel software
version 4.21e or above an authentication code
is sent to the panel. Subsequently, that panel
can only communicate with an authenticated
version of the Tool. If panel authentication is
not required, do not authenticate the Tool. To
authenticate the Tool:
1 Note the customer code and send it to your
company's authorised representative. Only the
authorised representative may apply for the
authentication licence key. The customer code
may be submitted (together with the other
requested data) using an electronic Authentication
passcode request, available by e-mail from:
technical.support@notifierfiresystems.co.uk
2 Notifier will e-mail the electronic passcode
request form back yo your company's
authorised representative with the licence
key (valid for a specific PC only).
If the Tool is later installed on a different physical
drive or partition, or if a licence expiry warning
is displayed (given at 30 and 7 days), the
registration procedure must be repeated.
997-291, Version 3.05
November 2010