Honeywell Notifier ID3000 Manual page 100

ID3000/ID2000 Fire Panel Configuration Tool Manual
4 - 23
Non-fire Activation
Select the required input:
a. Zone or cell or Any zone.
b. Individual device (restricted to devices of
type AUX).
c. Panel input 1 or 2. On ID
only, the panel can be specified.
Zone and device co-incidence options are not
available.
Transfer Flag
Select one of the 128 available transfer flags.
These flags allow the output from another
Control Matrix rule to be used as the input to
this rule.
Note: If the panel is on an ID
Network Location window is displayed.
Select which panel the Transfer Flag is
received from. The Specify Transfer
Flag window is then displayed.
997-291, Version 3.05
2 net configurations
2
net the Specify
November 2010