ID3000/ID2000 Fire Panel Configuration Tool Manual
'Send to Panel' is
only available
when a panel
configuration is
displayed in the
Tool window
If the Tool 'hangs' during a
'Receive' or 'Send', check
that the correct
Communication Port has been
selected.
1
2
1.5.8 Communications Menu
This menu has the following options:
a. Set up COM Port. Displays the Connection
Information Setup window.
b. Receive from Panel. Prompts for the
required database (via an 'Open' window),
then prompts for a Level 3 passcode and
displays the 'Receive' window (see next
page). Used to copy the panel's
configuration into the Tool. Connect the PC
(see Section 1.4) and then select Receive
from Panel.
c. Send to Panel. Prompts for a Level 3
passcode, then displays the 'Send' window
(next page +1). Used to load the
configuration to the panel. Connect the PC
(see Section 1.4) and then select Send to
Panel.
Connection Information Setup Window
Allows the communications port for your PC
tool to be set. The application automatically
finds
and
communication port(s).
1 Use the drop-down menu to select the port
you are going to connect for upload/
download.
2 Select OK.
1 - 14
displays
the
available
997-291, Version 3.05
November 2010