Honeywell Notifier ID3000 Manual page 138

b(ii)
b(i)
b(iii)
b(iv)
b(v)
ID3000/ID2000 Fire Panel Configuration Tool Manual
A1 - 5
Historic Log Menu
This menu has one option:
a. Request Data. The Request Historic Log
Event window is displayed. Either:
i Select 'Fetch all entries', or
ii Select each numeric field in turn and use
the spin buttons or PC keyboard to enter
the required values for a partial log request.
Select 'Send'. The panel's historic log is
extracted from the panel and is displayed in
the Historic & Data Log window.
Data Log Menu
This menu has the following options:
a. Fetch Data Log. Provided a data log has
been configured either at the panel or at the
Tool [see (b) below), the data is displayed
in the Historic & Data Log window.
b. Initialise Data Log Parameters. The Select
Log Device Data window is displayed:
i Select the device(s) (loop and address).
ii If checked, selects indefinite log. If
unchecked, enter the End Date for the log
(from the calendar) and the End Time.
iii Select the number of Samples.
i v Select the Interval between samples.
v. 'Send' the above to the panel.
997-291, Version 3.05
November 2010