Logging In And Changing Users; Logging In - American Dynamics Intellex Intellex DVMS Operating Instructions Manual

Chapter 2 — Basic Live Operation
LOGGING IN AND
CHANGING USERS

Logging In

NOTE: If system security is enabled, you must enter a valid
PIN code before the unit will clear the Enter PIN Code
screen and give you access to system controls (see
Security Setup in the Intellex Installation Instructions ).
When the unit is first powered up or after another user has
logged out, the Enter PIN Code screen appears.
Enter the four-digit PIN (Personal Identification Number) code
assigned by the system administrator. The unit displays aster-
isks as a security measure.
Enter the code from one of the following:
Screen Keypad:
1. Use the mouse pointer to click the numeric buttons to en-
ter the code.
2. Click (backspace) to erase an entry.
3. Click OK to log in.
Physical Keypad:
The physical keypad is located on the optional keyboard.
1. Make sure the numeric lock indicator on the keyboard is
lit. If not, press the numeric lock key on the keypad.
15