Pitney Bowes DM300c Operator's Manual page 40

3 • Setting Up Operators
Viewing and Editing Operators
7. Select Status to toggle an operator active or inactive.
8. Select Password. The Operator Password screen appears.
• Turn the operator password off for this operator by selecting
Turn Password Off.
• Type in the operator password and select Accept. You
are prompted to re-enter the operator password. Type the
operator password again and select Accept.
9. Press the green down arrow key and select Level to toggle
between the supervisor and operator access level privileges.
10. If necessary, press the green down arrow key and select Report
Printing to toggle between enabling and disabling report printing
capabilities for the operator.
NOTE:
i
print reports.
11. Select Done to save your changes.
Any changes you make will be seen by the edited operator the next
time he or she logs on to the system.
3-6
Report printing must be enabled for an operator to
SV62683 Rev. A