3 • Setting Up Operators
Creating Operators
The Operator Information screen displays.
Operator Information
◄ Name
◄ Status
◄ Password : ****
◄ Done
6. Select Status to toggle an operator active or inactive.
7. Press the green down arrow key and select Level to toggle
between the supervisor and operator access level privileges.
8. If necessary, press the green down arrow key and select Report
Printing to toggle between enabling and disabling report printing
capabilities for the operator.
NOTE:
i
print reports.
9. Select Done to save your changes.
Enabling/Disabling the Operator Auto Log Off Feature
Follow the steps here to set up your mailing system to log off an
operator automatically after running mail.
1. Press the Menu key.
2. Select Setup.
3. Press the green down arrow key and select Operator Setup.
If operators have been enabled, the Enter Supervisor Password
screen appears. At this point, you must enter a supervisor
password to continue with the operation or log off the system.
4. Press the green down arrow key and the select Auto Log Off to
toggle between On and Off.
This change will take effect the next time you or another operator
logs onto the system. At that time, the system will require a valid
operator ID and password to log on.
3-4
: Operator 123
: Active
Report printing must be enabled for an operator to
SV62683 Rev. A