Viewing And Editing Operators - Pitney Bowes DM300c Operator's Manual

Viewing and Editing Operators

The Viewing/Editing Operators screen allows you to access operator-
specific information that has been entered into the INVIEW™
Accounting system. You can view or edit the operator's name; lock
or unlock the operator; enable, disable, or edit a password; enable or
disable report printing; and edit the access level.
This operation requires that you have supervisor privileges.
NOTE: If you log in as an operator with supervisor privileges, you
i
do not have to enter a password to edit operators.
1. Press the Menu key.
2. Select Setup.
3. Press the green down arrow key and select Operator Setup.
If operators have been enabled, the Enter Supervisor Password
screen appears. At this point, you must enter a supervisor
password to continue with the operation or log off the system.
4. Select View/Edit Operators. The Select Operator screen
displays.
5. Select the operator you wish to view and/or edit. The Operator
Information screen appears. This screen allows you to view and
edit the basic settings for the operator you have selected.
6. Select Name. The Enter Operator Name screen displays.
Edit Operator Name
Operator 123_
◄ Edit Options
◄ View Full Screen
◄ Cancel
◄ Accept
• Press the Backspace (back arrow) key on the keypad to
delete the existing text entry, then type in new text. Select
Accept to return the Operator Information screen.
OR
• Select Edit Options to move the cursor within the text entry.
You can select Move Cursor left or Move Cursor right to
position the cursor, then use the keypad to enter characters
to replace the existing text. Select OK when done. Select
Accept to return to the Operator Information screen.
SV62683 Rev. A
3 • Setting Up Operators
3-5