Table of Contents
Advertisement
Ground stations will time out being tracked if no ADS-B uplink message is received
from the ground station for more than forty seconds.
Type the "stop" command to stop updating rxstatus and return to the prompt.
"cnfg" Command
5.2.2.10
This command displays configurable information such as the serial port settings (protocol and
baud rate), the ICAO address, and the VFR Call Sign. Example output is displayed below:
FFS Copyright © 2020 All rights reserved.
Figure 22: FDL-DB Series cnfg menu
ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
5-29
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ADS-B FDL-DB Dual Band Series and is the answer not in the manual?