Cnfg" Command - FreeFlight ADS-B FDL-978 Series Installation Manual

The fourth rx status section displays detailed ground station information. This information
includes total number of ground stations being received and detailed information about the 10
closest ground stations. The detailed ground station information includes Latitude, Longitude,
Site ID, time slot of last transmission, message count (Msgs), signal strength indication (SSI) in
dbm, and ground station time out in seconds (TO).
Ground stations will time out being tracked if no ADS-B uplink message is
received from the ground station for more than forty seconds.
Type the "stop" command to stop updating rx status and return to the prompt.
3.5.4.10

"cnfg" Command

This command displays configurable information such as the serial port settings (protocol and
baud rate), the ICAO address, and the VFR Call Sign. Example output is displayed below:
FFS Copyright © 2015 All rights reserved.
ADS-B FDL-978 Series and
Lite Series Installation Manual
Document No. 87343 Rev F
3-31