Alert Symbol Usage - FreeFlight ADS-B FDL-DB Dual Band Series Installation Information

Item
UAT
USB
UHF
V
VDC
VFR
VIL
VSWR
W
WAAS

1.3 Alert Symbol Usage

The following Warning, Caution, and Note symbols are used throughout this manual and their
hierarchy is structured as shown below. When an item applies to an entire section it will be
identified at the beginning of the applicable section. Otherwise, it will immediately precede the
information for which it applies.
Warnings are identified when failure to properly follow the instructions provided
may cause serious injury to personnel or damage to equipment if not followed.
Cautions are identified when failure to properly follow the instructions provided may
cause serious damage to equipment, or unintended operation, if not followed.
Notes are identified to provide additional information or explanation to the user.
FFS Copyright © 2020 All rights reserved.
Universal Access Transceiver
Universal Serial Bus
Ultra-High Frequency
volts
volts direct current
Visual Flight Rules
Vertical Integrity Limit
Voltage-Standing Wave Ratio
watts
Wide Area Augmentation System
ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
Definition
1-5