Equipment Compatibility And Functions - FreeFlight ADS-B FDL-DB Dual Band Series Installation Information

ADS-B FDL-DB Dual Band Series
Installation Manual
Document No. 88552 Rev A
7.3

Equipment Compatibility and Functions

The table below summarizes the ADS-B transmit control function capabilities of various potential
FDL-DB Series controllers. Per AC20-165B the Squawk and IDENT should be controlled for the
Transponder and ADS-B Out Transmitter through a single point of entry. There should also be
an ADS-B Fault annunciation for both ADS-B GPS loss/fault and ADS-B failure.
Table 22. ADS-B Transmit Control Functions for Various FDL-DB Series Controllers
Device
Device Model
Type
Apollo SL-70/R
Garmin GTX 330/33
Garmin GTX 327/32
Mode A/C Receiver
ARINC Transponder
Aspen EFD 500/1000
Garmin MX-20
Garmin GMX-200
Chelton Flight Logic
FreeFlight TC978
Garmin GSL 71
1
The GTX-330 only outputs the call sign in a single message when it is powered on. The FDL-DB
first in order to receive this message. If the call sign is received from the GTX-330, it is only set as the default call sign, and can be
changed using the TC978.
The table below contains the minimum compatible software versions as tested with the FDL-DB
Series.
Device
TC978 UAT Controller
Aspen EFD1000 PFD
Aspen EFD1000 MFD
Aspen EFD500 MFD
MX20 MFD
GMX 200 MFD
FFS Copyright © 2020 All rights reserved.
Squawk
Code/
IDENT
X
X
X
X
X
Controller
X
X
X
-
X
X
Table 23. Compatible Software Versions
Software Version 1.13 or later FAA-approved version
MAP 2.7.2 or later FAA-approved version
IOP 2.0.5 or later FAA-approved version
Software Version 5.7
Software Version 2.12 or later FAA approved version
Call TX Altitude
Sign Standby Inhbit
- X
1
- X
- X
- -
X X
- -
X X
X X
- -
X X
X X
Permitted Software Version
ADS-B Fault
Annunciation
X -
X -
X -
- -
X
- X
X X
X X
- X
X X
X -
Series
must be powered on
7-1