Get Autoprovisioning Template Button - CyberData 011146 Operation Manual

2.6.15.3 Get Autoprovisioning Template Button

The Get Autoprovisioning Template button allows the user to generate, download, edit, and then
store an autoprovisioning template on the server that serves the autoprovisioning files for devices.
To generate an autoprovisioning template directly from the device, complete the following steps:
1. On the Autoprovisioning page, click on the Get Autoprovisioning Template button.
2. You will see a window prompting you to save a configuration file (.xml) to a location on your
3. Choose a location to save the configuration file and click on OK. See
4. At this point, you can open and edit the autoprovisioning template to change the configuration
5. You can then upload the autoprovisioning file to a TFTP or HTTP server where the file can be
CyberData Corporation
computer (Figure 2-36). The configuration file is the basis for the default configuration settings
for your unit).
settings in the template for the unit.
loaded onto other devices.
Figure 2-36. Configuration File
931803A
Setting Up the SIP Paging Server
Configure the Autoprovisioning Parameters
Figure 2-36.
Operations Guide
79