CyberData 011146 Operation Manual page 30

Web Page Item
At this point you can:
•
•
•
•
•
•
•
•
•
Note
CyberData Corporation
Table 2-4. Home Page Overview (continued)
Description
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of
the web page items. First click on the Toggle Help button, and you will
see a question mark (
Move the mouse pointer to hover over a question mark to see a short
description of a specific web page item.
Review the SIP Paging Server's Current Settings. Use the RTFM switch to restore the factory
default settings. See Section 2.5, "Restore the Factory Default
Configure the device parameters. Click on the Device button and see
the Device Parameters" for instructions.
Configure the network parameters. Click on the Network button and see
"Configure the Network Parameters"
Configure the SIP parameters. Click on the SIP button and see
SIP Parameters" for instructions.
Configure the PGROUPS parameters. Click on the PGROUPS button and see
"Configure the Paging Groups (PGROUPS) Parameters"
Configure the fault detection parameters. Click on the Fault button and see
"Configure the Fault Detection Parameters"
Configure the audio parameters. Click on the Audiofiles button and see
"Configure the Audio Parameters"
Configure the event parameters. Click on the Events button and see
the Event Parameters" for instructions.
Configure the autoprovisioning parameters. Click on the Autoprov button and see
2.6.15, "Configure the Autoprovisioning Parameters"
Click on the Firmware button any time you need to upload new versions of the firmware.
See Section 2.7, "Upgrade the Firmware"
) appear next to some of the web page items.
for instructions.
for instructions.
for instructions.
for instructions.
for instructions.
931803A
Setting Up the SIP Paging Server
Log in to the Configuration GUI
Settings".
Section 2.6.5, "Configure
Section 2.6.6,
Section 2.6.7, "Configure the
Section 2.6.8,
for instructions.
Section 2.6.12,
Section 2.6.13,
Section 2.6.14, "Configure
Operations Guide
22
Section