CyberData 011146 Manual

Connecting the sip paging server to valcom v-1030c or v-1036c selfamplified speakers using a valcom v-1094 or v-2994 page port pre-amplifier/expander

Hide thumbs Also See for 011146:

The IP Endpoint Company

Connecting the SIP Paging Server to

Valcom V-1030C or V-1036C Self-



Amplified Speakers Using a Valcom



V-1094 or V-2994 Page Port

Pre-Amplifier/Expander

Document Part #930907B

CyberData Corporation

3 Justin Court

Monterey, CA 93940

(831) 373-2601

Table of Contents

Need help?

Do you have a question about the 011146 and is the answer not in the manual?

Page 1 The IP Endpoint Company Connecting the SIP Paging Server to Valcom V-1030C or V-1036C Self-  Amplified Speakers Using a Valcom  V-1094 or V-2994 Page Port Pre-Amplifier/Expander Document Part #930907B CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601...
Page 2 Server Valcom V-1030C/1036C self-amplified horns without the use of a Page Port Pre-Amplifier/Expander results in severe audio degradation and could cause GENERAL ALERT irreparable damage to the CyberData device. This would be considered installation damage and void the warranty. Contact CyberData VoIP Technical Support before installation with questions or concerns about connecting to Valcom V- 1030C/1036C or other self-amplified horns.
Page 3 SIP Paging Server Documentation web page), every time an audio file is played out of the local line-out or 600 Ohm output, the relay will close, thereby enabling amplifiers with a remote turn-on capability to become active. CyberData Corporation 930907B Connection Guide...