CyberData 011146 Operation Manual page 66

On the Audiofiles page, enter values for the parameters indicated in
Note
Note
Web Page Item
Audio Files
0-9
Dot
Audio Test
Page Tone
Your IP Address is
Rebooting
Restoring Default
Ringback Tone
Ring Tone
Night Ring
Sensor Triggered
Stored Message File Not Found
Enter Zone
Confused
CyberData Corporation
Each entry on the Audiofiles page replaces one of the stock audio files on the board. When
the input box displays the word default, the SIP Paging Server is using the stock audio file.
If that file is replaced with a user file, it will display the uploaded filename.
The question mark icon (
after the Toggle Help button is pressed
Table 2-14. Audiofiles Configuration Parameters
Description
The name of the audio configuration option is the same as the spoken audio that
plays on the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot."
Corresponds to the message "This is the CyberData IP speaker test message..."
Corresponds to a simple tone that is unused by default.
Corresponds to the message "Your IP address is..."
Corresponds to the spoken word "Rebooting."
Corresponds to the message "Restoring default."
Specifies the Ringback Tone.
Specifies the Ring Tone.
Specifies the ringtone for nightring. By default this parameter uses the same
audio file that is selected for the Ring Tone parameter.
Corresponds to the message "Sensor Triggered."
Corresponds to the message "Stored Message File Not Found."
Corresponds to the words "Enter Zone" used in the audio menu played to the
caller.
Corresponds to the message "Confused."
The Browse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
931803A
) in the following table shows which web page items will be defined
.
Setting Up the SIP Paging Server
Configure the Audio Parameters
Table 2-14.
Operations Guide
58