CyberData 011146 Operation Manual page 45

Setting Up the SIP Paging Server 37
Configure the SIP Parameters
4. On the Fault page (Figure 2-18) in the Dial Out Extension field, enter the IP address of the
phone that is to be called when a fault is detected at the Fault Sense Input.
Note Establishing point-to-point SIP calls may not work with all phones.
Figure 2-18. Fault Page
CyberData Paging Server
In the Dial Out Extension field, enter the IP address of the phone
that is to be called when a fault is detected at the Fault Sense Input.
CyberData Corporation 931803A Operations Guide