Parameter Management Utility; Firmware Upgrade Utility - Ametek AMEVision User Manual

Parameter Management Utility

This menu is used to save or restore sensor user parameters or revert the sen-
sor parameters to factory default.
1. Press the Left or Right arrows to locate the Parameter Management
2. Press ENTER/MENU to access the Sensor Parameters Management
3. Use the navigation arrows to select the function:
4. Press ENTER/MENU to save the parameters.
5. Press CANCEL to exit the screen.

Firmware Upgrade Utility

This menu displays the currently installed versions of the Sensor and Host
firmware. Use this menu to:
•
•
1. Press the Left or Right arrows to locate the Firmware Upgrade menu and
2. Press ENTER/MENU to access the Firmware Upgrade screen.
3. Use the navigation arrows to select the option to upgrade and press EN-
3-12 | Thermox ® AMEVision Display User Interface
menu.
menu. The Sensor Parameter Management screen displays.
- SAVE sensor's current parameters
- RESTORE previously user-saved sensor parameters or
- REVERT to the factory default parameters.
Verify the installed Sensor Firmware version or download upgraded or
new firmware
Verify the installed Host Firmware version or download upgraded or new
firmware
Firmware upgrades are carried out using a USB flash drive. It is neces-
sary to plug the USB flash drive into the USB port inside the AMEVision
enclosure to download the software.
press ENTER/MENU.
TER/MENU.
PN 9000-165-VE, Rev P