Safety Notes; Electrical Safety; Grounding - Ametek AMEVision User Manual

Safety Notes

WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical
instructions as follows:

Electrical Safety

Up to 5 kV may be present in the housing. Always shut down power source(s) before
performing maintenance or troubleshooting. Only a qualified electrician should make
electrical connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair
the safety protection originally provided by the equipment.

Grounding

Instrument grounding is mandatory. Performance specifications and safety protection
are void if instrument is operated from an improperly grounded power source.
®
vi | Thermox AMEVision Display User Interface
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in damage to
the equipment.
Important information that should not be overlooked.
Burn hazard. Hot surface. Do not touch, allow to cool before servicing.
Verify ground continuity of all equipment before applying power.
PN 9000-165-VE, Rev P