Setting Calibration Gas Values - Ametek AMEVision User Manual

Setting Calibration Gas Values

The Calibration Gas Values screen allows you to set and save the calibration
gas values for the sensor you have chosen, before calibrating the analyzer.
These values will be used when calibrating the sensor. However, if the values
are not set here, they can still be set during the calibration process under the
Start Calibration menu.
Figure 2-12.1.
Set Calibration Gas Values
screen (via Cal Gas Value menu).
Figure 2-12.2.
Start Calibration screen.
1. From the Main Menu screen, press ENTER/MENU to access the Calibra-
2. Press the Left or Right arrows to locate the Cal Gas Values menu and press
3. Enter the values for the gases available for the sensor you have designated
4. Press ENTER/MENU to accept the values you entered.
2-16 | Thermox ® AMEVision Display User Interface


tion Menu.
ENTER/MENU.
on the HOME screen.
PN 9000-165-VE, Rev P