Analog Output - Ametek AMEVision User Manual

Analog Output

You can direct process readings to any of the three analog output ports.
Figure 2-9.
Analog Output configure
screen.
Function
Mode
Span
Zero
Track/Hold during Cal**
** Define the signals to send to the selected analog output port during a calibration. You have
the option to either hold the last process reading or track calibration readings.
PN 9000-165-VE, Rev P
The sensor you have selected on the HOME screen is the only sensor
whose functions and process will displayed on this menu. To config-
ure or view any additional sensor, you must select that sensor on the
HOME screen first.
% O
2
Cell mV
Combustibles
Methane
0–20 mA
4–20 mA
Namur*
Enter reading for 20 mA
(%) for O and methane
2
(ppm) for combustibles
(mV) for cell millivolt
Enter reading for 0/4 mA
(%) for O and methane
2
(ppm) for combustibles
(mV) for cell millivolt
Track during Cal
Hold during Cal
|
Controller/Interface 2-11