Process Pressure - Ametek AMEVision User Manual

4. Press ENTER/MENU to select each option. To deselect the option, press
5. Use the arrow keys to view the options. When you have made your selec-

Process Pressure

Define your process pressure and whether your process is operating under
a positive or negative pressure. Setting this value corrects oxygen measure-
ments for the defined pressure.
Figure 2-8.
Process Pressure screen.
1. From the Main Menu screen, press ENTER/MENU to access the Configu-
2. Press the Left or Right arrows to locate the Process Pressure menu and
3. Enter the process pressure.
4. Navigate to the ACCEPT button and press ENTER/MENU to accept your
2-10 | Thermox ® AMEVision Display User Interface
ENTER again.
tions, navigate to ACCEPT and press ENTER/MENU. Selected options are
indicated by an 'X' in the check box.
The sensor you have selected on the HOME screen is the only sensor
whose functions and process will be displayed on the AMEVision
menus. To view additional sensor setups, you must first select that
sensor on the HOME screen.
ration Menu.
press ENTER/MENU.
entry.
To enter a negative process pressure, use the minus ('-') key on the
AMEVision keypad before entering the number.
PN 9000-165-VE, Rev P