Configuration Menu - Ametek AMEVision User Manual

Configuration Menu

Figure 2-2.
Sensor Configuration menu.
Analog Output
Sensor Configuration
Alarm Configuration
Communications
Process Pressure
System Time
Passcode Configuration
Sensor Name Configuration
Selecting Menu Options
Press ENTER/MENU on the AMEVision keypad.
Setting Menu Options
To accept changes you have made press ENTER/MENU.
Exiting Menu Options
Press CANCEL on the AMEVision keypad.
2-4 | Thermox ® AMEVision Display User Interface
Define parameters that control analog current outputs.
Define the type of sensor you are using and the gases
to be measured.
Define parameters that control the alarm relays.
Define AMEVision communication parameters. Select
TC/IP or modbus function.
Select a positive or negative process pressure. Enter
process pressure value.
Set system and display time in 24-hour format.
Create a system password to limit control unit access.
Name sensor and connected sensors in a multiple-
analyzer configuration.
PN 9000-165-VE, Rev P